<!doctype linuxdoc system>

<!-- LyX 1.1 created this file. For more info see http://www.lyx.org/ -->
<article>
<title>
Options du Kernel
</title>
<author>
Jean-Daniel Dodin - http://www.dodin.net - jdanield@free.fr
</author>
<date>
V0.1 12 février 2000
</date>
<abstract>
Pour garder une trace de la configuration du kernel que j'ai utilisée,
 j'ai "assemblé" les différents fichiers config.ini (et Config.ini). C'est peut-être
 faisable automatiquement, mais je ne sais pas comment, du coup je l'ai fait
 "à la main". Quel boulot ! Si vous savez comment l'automatiser, je suis preneur.
 En fait j'ai fait comme quand on "sauve" la configuration, à la fin, mais...
 en faisant tout le contraire : j'ai gardé les messages et viré les variables.
 Source, le kernel 2.2.14. version xconfig (les titres ne sont pas dans le même
 ordre que menuconfig).
</abstract>
<toc>
<sect>
Linux Kernel Configuration
<p>
bool = yes or no
</p>
<p>
tristate = yes module or no
</p>
<p>
choice = select
</p>
<p>
int = valeur entière à fournir
</p>
<p>
hex = valeur hexa à fournir
</p>
<p>
string = chaine à fournir
</p>
<sect>
Code maturity level options
<p>
bool 'Prompt for development and/or incomplete code/drivers'
</p>
<p>
Processor type and features
</p>
<p>
choice 'Processor family'
</p>
<p>
        &quot;386
</p>
<p>
         486/Cx486
</p>
<p>
         586/K5/5x86/6x86
</p>
<p>
         Pentium/K6/TSC
</p>
<p>
         PPro/6x86MX
</p>
<p>
choice 'Maximum Physical Memory'
</p>
<p>
        &quot;1GB
</p>
<p>
         2GB
</p>
<p>
bool 'Math emulation'
</p>
<p>
bool 'MTRR (Memory Type Range Register) support
</p>
<p>
bool 'Symmetric multi-processing support'
</p>
<sect>
Loadable module support
<p>
bool 'Enable loadable module support'
</p>
<p>
bool 'Set version information on all symbols for modules'
</p>
<p>
bool 'Kernel module loader'
</p>
<sect>
General setup
<p>
bool 'Networking support'
</p>
<p>
bool 'PCI support'
</p>
<p>
choice 'PCI access mode'
</p>
<p>
         BIOS
</p>
<p>
         Direct
</p>
<p>
         Any
</p>
<p>
bool '   PCI quirks'
</p>
<p>
bool '   PCI bridge optimization (experimental)'
</p>
<p>
bool '   Backward-compatible /proc/pci'
</p>
<p>
bool 'MCA support'
</p>
<p>
bool 'SGI Visual Workstation support'
</p>
<p>
bool 'System V IPC'
</p>
<p>
bool 'BSD Process Accounting'
</p>
<p>
bool 'Sysctl support'
</p>
<p>
tristate 'Kernel support for a.out binaries'
</p>
<p>
tristate 'Kernel support for ELF binaries'
</p>
<p>
tristate 'Kernel support for MISC binaries'
</p>
<p>
tristate 'Kernel support for JAVA binaries (obsolete)'
</p>
<p>
tristate 'Parallel port support'
</p>
<p>
tristate '   PC-style hardware'
</p>
<p>
bool '   Support foreign hardware'
</p>
<p>
bool 'Advanced Power Management BIOS support'
</p>
<p>
bool '   Ignore USER SUSPEND'
</p>
<p>
bool '   Enable PM at boot time'
</p>
<p>
bool '   Make CPU Idle calls when idle'
</p>
<p>
bool '   Enable console blanking using APM'
</p>
<p>
bool '   Power off on shutdown'
</p>
<p>
bool '   Ignore multiple suspend'
</p>
<p>
bool '   Ignore multiple suspend/resume cycles'
</p>
<p>
bool '   RTC stores time in GMT'
</p>
<p>
bool '   Allow interrupts during APM BIOS calls'
</p>
<sect>
'Plug and Play support'
<p>
bool 'Plug and Play support'
</p>
<p>
tristate '  Auto-probe for parallel devices'
</p>
<sect>
'Block devices'
<p>
tristate 'Normal PC floppy disk support'
</p>
<p>
tristate 'Amiga floppy support'
</p>
<p>
tristate 'Atari floppy support'
</p>
<p>
tristate 'Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support'
</p>
<p>
bool 'Old hard disk (MFM/RLL/IDE) driver'
</p>
<p>
bool '   Use old disk-only driver on primary interface'
</p>
<p>
tristate '   Include IDE/ATA-2 DISK support'
</p>
<p>
tristate '   Include IDE/ATAPI CDROM support'
</p>
<p>
tristate '   Include IDE/ATAPI TAPE support'
</p>
<p>
tristate '   Include IDE/ATAPI FLOPPY support'
</p>
<p>
tristate '   SCSI emulation support'
</p>
<p>
bool '   CMD640 chipset bugfix/support'
</p>
<p>
bool '     CMD640 enhanced support'
</p>
<p>
bool '   RZ1000 chipset bugfix/support'
</p>
<p>
bool '   Generic PCI IDE chipset support'
</p>
<p>
bool '     Generic PCI bus-master DMA support'
</p>
<p>
bool '     Boot off-board chipsets first support'
</p>
<p>
bool '     Use DMA by default when available'
</p>
<p>
bool '     OPTi 82C621 chipset enhanced support (EXPERIMENTAL)'
</p>
<p>
bool '     Tekram TRM290 chipset support (EXPERIMENTAL)'
</p>
<p>
bool '     NS87415 chipset support (EXPERIMENTAL)'
</p>
<p>
bool '     VIA82C586 chipset support (EXPERIMENTAL)'
</p>
<p>
bool '     CMD646 chipset support (EXPERIMENTAL)'
</p>
<p>
bool '   Winbond SL82c105 support'
</p>
<p>
bool '   Builtin PowerMac IDE support'
</p>
<p>
bool '     PowerMac IDE DMA support'
</p>
<p>
bool '     Use DMA by default'
</p>
<p>
bool '   Other IDE chipset support'
</p>
<p>
bool '     Generic 4 drives/port support'
</p>
<p>
bool '     ALI M14xx support'
</p>
<p>
bool '     DTC-2278 support'
</p>
<p>
bool '     Holtek HT6560B support'
</p>
<p>
bool '     QDI QD6580 support'
</p>
<p>
bool '     UMC-8672 support'
</p>
<p>
bool '     PROMISE DC4030 support (EXPERIMENTAL)'
</p>
<p>
tristate 'PS/2 ESDI hard disk support'
</p>
<p>
tristate 'Amiga Zorro II ramdisk support'
</p>
<p>
tristate 'Atari ACSI support'
</p>
<p>
bool 'Probe all LUNs on each ACSI device'
</p>
<p>
tristate 'Atari SLM laser printer support'
</p>
<p>
tristate 'Loopback device support'
</p>
<p>
tristate 'Network block device support'
</p>
<p>
bool 'Multiple devices driver support'
</p>
<p>
tristate '   Linear (append) mode'
</p>
<p>
tristate '   RAID-0 (striping) mode'
</p>
<p>
tristate '   RAID-1 (mirroring) mode'
</p>
<p>
tristate '   RAID-4/RAID-5 mode'
</p>
<p>
bool '      Boot support (linear, striped)'
</p>
<p>
tristate 'RAM disk support'
</p>
<p>
bool '   Initial RAM disk (initrd) support'
</p>
<p>
tristate 'XT hard disk support'
</p>
<p>
tristate 'Mylex DAC960/DAC1100 PCI RAID Controller support'
</p>
<p>
tristate 'Parallel port IDE device support'
</p>
<p>
tristate '  Parallel port IDE disks'
</p>
<p>
tristate '  Parallel port ATAPI CD-ROMs'
</p>
<p>
tristate '  Parallel port ATAPI disks'
</p>
<p>
tristate '  Parallel port ATAPI tapes'
</p>
<p>
tristate '  Parallel port generic ATAPI devices'
</p>
<p>
tristate '    ATEN EH-100 protocol'
</p>
<p>
tristate '    MicroSolutions backpack protocol'
</p>
<p>
tristate '    DataStor Commuter protocol'
</p>
<p>
tristate '    DataStor EP-2000 protocol'
</p>
<p>
tristate '    FIT TD-2000 protocol'
</p>
<p>
tristate '    FIT TD-3000 protocol'
</p>
<p>
tristate '    Shuttle EPAT/EPEZ protocol'
</p>
<p>
tristate '    Shuttle EPIA protocol'
</p>
<p>
tristate '    Freecom IQ ASIC-2 protocol'
</p>
<p>
tristate '    FreeCom power protocol'
</p>
<p>
tristate '    KingByte KBIC-951A/971A protocols'
</p>
<p>
tristate '    KT PHd protocol'
</p>
<p>
tristate '    OnSpec 90c20 protocol'
</p>
<p>
tristate '    OnSpec 90c26 protocol'
</p>
<p>
tristate 'Compaq SMART2 support'
</p>
<sect>
Networking options
<p>
tristate 'Packet socket'
</p>
<p>
bool 'Kernel/User netlink socket'
</p>
<p>
bool 'Routing messages'
</p>
<p>
tristate 'Netlink device emulation'
</p>
<p>
bool 'Network firewalls'
</p>
<p>
bool 'Socket Filtering'
</p>
<p>
tristate 'Unix domain sockets'
</p>
<p>
bool 'TCP/IP networking'
</p>
<p>
bool'IP: multicasting'
</p>
<p>
bool 'IP: advanced router'
</p>
<p>
bool 'IP: policy routing'
</p>
<p>
bool 'IP: equal cost multipath'
</p>
<p>
bool 'IP: use TOS value as routing key'
</p>
<p>
bool 'IP: verbose route monitoring'
</p>
<p>
bool 'IP: large routing tables'
</p>
<p>
bool 'IP: fast network address translation'
</p>
<p>
bool 'IP: kernel level autoconfiguration'
</p>
<p>
bool '      BOOTP support'
</p>
<p>
bool '      RARP support'
</p>
<p>
bool 'IP: firewalling'
</p>
<p>
bool 'IP: firewall packet netlink device'
</p>
<p>
bool 'IP: use FWMARK value as routing key'
</p>
<p>
bool 'IP: transparent proxy support'
</p>
<p>
bool 'IP: masquerading'
</p>
<p>
bool 'IP: ICMP masquerading'
</p>
<p>
bool 'IP: masquerading special modules support'
</p>
<p>
tristate 'IP: ipautofw masq support (EXPERIMENTAL)'
</p>
<p>
tristate 'IP: ipportfw masq support (EXPERIMENTAL)'
</p>
<p>
tristate 'IP: ip fwmark masq-forwarding support (EXPERIMENTAL)'
</p>
<p>
bool 'IP: optimize as router not host'
</p>
<p>
tristate 'IP: tunneling'
</p>
<p>
tristate 'IP: GRE tunnels over IP'
</p>
<p>
bool 'IP: broadcast GRE over IP'
</p>
<p>
bool 'IP: multicast routing'
</p>
<p>
bool 'IP: PIM-SM version 1 support'
</p>
<p>
bool 'IP: PIM-SM version 2 support'
</p>
<p>
bool 'IP: aliasing support'
</p>
<p>
bool 'IP: ARP daemon support (EXPERIMENTAL)'
</p>
<p>
bool 'IP: TCP syncookie support (not enabled per default)'
</p>
<p>
&num;bool 'IP: PC/TCP compatibility mode'
</p>
<p>
tristate 'IP: Reverse ARP'
</p>
<p>
&num;bool 'IP: Path MTU Discovery (normally enabled)'
</p>
<p>
&num;bool 'IP: Disable NAGLE algorithm (normally enabled)'
</p>
<p>
bool 'IP: Allow large windows (not recommended if &lt;16Mb of memory)'
</p>
<p>
&num;bool 'IP: support experimental checksum copy to user for UDP'
</p>
<p>
tristate 'The IPv6 protocol (EXPERIMENTAL)'
</p>
<p>
bool 'IPv6: enable EUI-64 token format'
</p>
<p>
bool 'IPv6: disable provider based addresses'
</p>
<p>
bool 'IPv6: routing messages via old netlink'
</p>
<p>
&num;bool 'IPv6: flow policy support' CONFIG_RT6_POLICY
</p>
<p>
&num;bool 'IPv6: firewall support' CONFIG_IPV6_FIREWALL
</p>
<p>
tristate 'The IPX protocol'
</p>
<p>
bool 'IPX: Full internal IPX network'
</p>
<p>
tristate 'IPX: SPX networking (EXPERIMENTAL)'
</p>
<p>
tristate 'Appletalk DDP'
</p>
<p>
&num;  tristate 'DECnet Support (NOT YET FUNCTIONAL)'
</p>
<p>
tristate 'CCITT X.25 Packet Layer (EXPERIMENTAL)'
</p>
<p>
tristate 'LAPB Data Link Driver (EXPERIMENTAL)'
</p>
<p>
bool 'Bridging (EXPERIMENTAL)'
</p>
<p>
int '  Maximum number of bridged interfaces'
</p>
<p>
bool '802.2 LLC (EXPERIMENTAL)'
</p>
<p>
&num;   bool 'Netbeui (EXPERIMENTAL)'
</p>
<p>
tristate 'Acorn Econet/AUN protocols (EXPERIMENTAL)'
</p>
<p>
bool '  AUN over UDP'
</p>
<p>
bool '  Native Econet'
</p>
<p>
tristate 'WAN router'
</p>
<p>
bool 'Fast switching (read help!)'
</p>
<p>
bool 'Forwarding between high speed interfaces'
</p>
<p>
bool 'CPU is too slow to handle full bandwidth'
</p>
<sect>
QoS and/or fair queueing'
<p>
bool 'QoS and/or fair queueing'
</p>
<p>
tristate 'CBQ packet scheduler'
</p>
<p>
tristate 'CSZ packet scheduler'
</p>
<p>
&num;tristate 'H-PFQ packet scheduler'
</p>
<p>
&num;tristate 'H-FSC packet scheduler'
</p>
<p>
tristate 'The simplest PRIO pseudoscheduler'
</p>
<p>
tristate 'RED queue'
</p>
<p>
tristate 'SFQ queue'
</p>
<p>
tristate 'TEQL queue'
</p>
<p>
tristate 'TBF queue'
</p>
<p>
bool 'QoS support'
</p>
<p>
bool 'Rate estimator'
</p>
<p>
bool 'Packet classifier API'
</p>
<p>
tristate 'Routing table based classifier'
</p>
<p>
tristate 'Firewall based classifier'
</p>
<p>
tristate 'U32 classifier'
</p>
<p>
tristate 'Special RSVP classifier'
</p>
<p>
tristate 'Special RSVP classifier for IPv6'
</p>
<p>
bool 'Ingres traffic policing'
</p>
<sect>
Telephony support
<p>
tristate 'Linux telephony support'
</p>
<p>
tristate 'QuickNet Internet LineJack/PhoneJack support'
</p>
<sect>
SCSI support
<p>
tristate 'SCSI support'
</p>
<p>
tristate 'SCSI disk support'
</p>
<p>
tristate 'SCSI tape support'
</p>
<p>
tristate 'SCSI CD-ROM support'
</p>
<p>
bool '  Enable vendor-specific extensions (for SCSI CDROM)'
</p>
<p>
tristate 'SCSI generic support'
</p>
<p>
bool 'Probe all LUNs on each SCSI device'
</p>
<p>
bool 'Verbose SCSI error reporting (kernel size +=12K)'
</p>
<p>
bool 'SCSI logging facility'
</p>
<sect>
SCSI low-level drivers
<p>
tristate '7000FASST SCSI support'
</p>
<p>
tristate 'ACARD SCSI support'
</p>
<p>
tristate 'Adaptec AHA152X/2825 support'
</p>
<p>
tristate 'Adaptec AHA1542 support'
</p>
<p>
tristate 'Adaptec AHA1740 support'
</p>
<p>
tristate 'Adaptec AIC7xxx support'
</p>
<p>
bool '   Enable Tagged Command Queueing (TCQ) by default'
</p>
<p>
int  '   Maximum number of TCQ commands per device'
</p>
<p>
bool '   Collect statistics to report in /proc'
</p>
<p>
int  '   Delay in seconds after SCSI bus reset'
</p>
<p>
tristate 'IBM ServeRAID support'
</p>
<p>
tristate 'AdvanSys SCSI support'
</p>
<p>
tristate 'Always IN2000 SCSI support'
</p>
<p>
tristate 'AM53/79C974 PCI SCSI support'
</p>
<p>
tristate 'AMI MegaRAID support'
</p>
<p>
tristate 'BusLogic SCSI support'
</p>
<p>
bool '  Omit FlashPoint support'
</p>
<p>
tristate 'DTC3180/3280 SCSI support'
</p>
<p>
tristate 'EATA ISA/EISA/PCI (DPT and generic EATA/DMA-compliant boards)
 support'
</p>
<p>
bool ' enable tagged command queueing'
</p>
<p>
bool ' enable elevator sorting'
</p>
<p>
int ' maximum number of queued commands'
</p>
<p>
tristate 'EATA-DMA &lsqb;Obsolete&rsqb; (DPT, NEC, AT&amp;T, SNI, AST,
 Olivetti, Alphatronix) support'
</p>
<p>
tristate 'EATA-PIO (old DPT PM2001, PM2012A) support'
</p>
<p>
tristate 'Future Domain 16xx SCSI/AHA-2920A support'
</p>
<p>
tristate 'Future Domain MCS-600/700 SCSI support'
</p>
<p>
tristate 'GDT SCSI Disk Array Controller support'
</p>
<p>
tristate 'Generic NCR5380/53c400 SCSI support'
</p>
<p>
bool ' Enable NCR53c400 extensions'
</p>
<p>
choice 'NCR5380/53c400 mapping method (use Port for T130B)'
</p>
<p>
not set
</p>
<p>
Port
</p>
<sect>
Memory
<p>
tristate 'Initio 9100U(W) support'
</p>
<p>
tristate 'Initio INI-A100U2W support'
</p>
<p>
tristate 'IOMEGA parallel port (ppa - older drives)'
</p>
<p>
tristate 'IOMEGA parallel port (imm - newer drives)'
</p>
<p>
bool ' ppa/imm option - Use slow (but safe) EPP-16'
</p>
<p>
bool ' ppa/imm option - Assume slow parport control register'
</p>
<p>
tristate 'NCR53c406a SCSI support'
</p>
<p>
tristate 'symbios 53c416 SCSI support'
</p>
<p>
tristate 'Simple 53c710 SCSI support (Compaq, NCR machines)'
</p>
<p>
tristate 'NCR53c7,8xx SCSI support'
</p>
<p>
bool ' always negotiate synchronous transfers'
</p>
<p>
bool ' allow FAST-SCSI &lsqb;10MHz&rsqb;'
</p>
<p>
bool ' allow DISCONNECT'
</p>
<p>
tristate 'NCR53C8XX SCSI support'
</p>
<p>
tristate 'SYM53C8XX SCSI support'
</p>
<p>
int ' default tagged command queue depth'
</p>
<p>
int ' maximum number of queued commands'
</p>
<p>
int ' synchronous transfers frequency in MHz'
</p>
<p>
bool ' enable profiling'
</p>
<p>
bool ' use normal IO'
</p>
<p>
bool ' include support for the NCR PQS/PDS SCSI card'
</p>
<p>
bool ' not allow targets to disconnect'
</p>
<p>
bool ' assume boards are SYMBIOS compatible'
</p>
<p>
tristate 'IBMMCA SCSI support'
</p>
<p>
bool ' Standard SCSI-order'
</p>
<p>
bool ' Reset SCSI-devices at boottime'
</p>
<p>
tristate 'NCR MCA 53C9x SCSI support'
</p>
<p>
tristate 'PAS16 SCSI support'
</p>
<p>
tristate 'PCI2000 support'
</p>
<p>
tristate 'PCI2220i support'
</p>
<p>
tristate 'PSI240i support'
</p>
<p>
tristate 'Qlogic FAS SCSI support'
</p>
<p>
tristate 'Qlogic ISP SCSI support'
</p>
<p>
tristate 'Qlogic ISP FC SCSI support'
</p>
<p>
tristate 'Seagate ST-02 and Future Domain TMC-8xx SCSI support'
</p>
<p>
tristate 'Tekram DC390(T) and Am53/79C974 SCSI support'
</p>
<p>
bool ' _omit_ support for non-DC390 adapters'
</p>
<p>
tristate 'Trantor T128/T128F/T228 SCSI support'
</p>
<p>
tristate 'UltraStor 14F/34F support'
</p>
<p>
bool ' enable elevator sorting'
</p>
<p>
int ' maximum number of queued commands'
</p>
<p>
tristate 'UltraStor SCSI support'
</p>
<p>
tristate 'SCSI debugging host adapter'
</p>
<p>
tristate 'MESH (Power Mac internal SCSI) support'
</p>
<p>
int ' maximum synchronous transfer rate (MB/s) (0 = async)'
</p>
<p>
tristate '53C94 (Power Mac external SCSI) support'
</p>
<p>
tristate 'Acorn SCSI card (aka30) support'
</p>
<p>
bool '  Support SCSI 2 Tagged queueing'
</p>
<p>
bool '  Support SCSI 2 Synchronous Transfers'
</p>
<p>
tristate 'CumanaSCSI II support (Experimental)'
</p>
<p>
tristate 'EESOX support (Experimental)'
</p>
<p>
tristate 'PowerTec support (Experimental)'
</p>
<p>
tristate 'CumanaSCSI I support'
</p>
<p>
tristate 'EcoScsi support'
</p>
<p>
tristate 'Oak SCSI support'
</p>
<p>
bool 'MIPS JAZZ FAS216 SCSI support'
</p>
<sect>
Network device support
<p>
bool 'Network device support'
</p>
<p>
tristate 'Dummy net driver support'
</p>
<p>
tristate 'EQL (serial line load balancing) support'
</p>
<p>
tristate 'Ethertap network tap'
</p>
<p>
tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000
</p>
<p>
bool 'FDDI driver support'
</p>
<p>
bool 'Digital DEFEA and DEFPA adapter support'
</p>
<p>
bool 'HIPPI driver support (EXPERIMENTAL)'
</p>
<p>
tristate 'Essential RoadRunner HIPPI PCI adapter support'
</p>
<p>
bool '  Use large TX/RX rings'
</p>
<p>
tristate 'PLIP (parallel port) support'
</p>
<p>
tristate 'PPP (point-to-point) support'
</p>
<p>
tristate 'SLIP (serial line) support'
</p>
<p>
bool ' CSLIP compressed headers'
</p>
<p>
bool ' Keepalive and linefill'
</p>
<p>
bool ' Six bit SLIP encapsulation'
</p>
<p>
bool 'Wireless LAN (non-hamradio)'
</p>
<p>
tristate 'STRIP (Metricom starmode radio IP)'
</p>
<p>
tristate 'AT&amp;T WaveLAN &amp; DEC RoamAbout DS support'
</p>
<p>
tristate 'Aironet Arlan 655 &amp; IC2200 DS support'
</p>
<p>
bool 'Fibre Channel driver support'
</p>
<p>
dep_tristate 'Interphase 5526 Tachyon chipset based adaptor support'
</p>
<p>
tristate 'Red Creek Hardware VPN (EXPERIMENTAL)'
</p>
<p>
tristate 'Traffic Shaper (EXPERIMENTAL)'
</p>
<p>
tristate 'LAPB over Ethernet driver'
</p>
<p>
tristate 'X.25 async driver'
</p>
<p>
tristate 'SBNI12-xx support'
</p>
<sect>
ARCnet devices
<p>
tristate 'ARCnet support'
</p>
<p>
bool '  Enable arc0e (ARCnet &quot;Ether-Encap&quot; packet format)'
</p>
<p>
bool '  Enable arc0s (ARCnet RFC1051 packet format)'
</p>
<p>
tristate '  ARCnet COM90xx (normal) chipset driver'
</p>
<p>
tristate '  ARCnet COM90xx (IO mapped) chipset driver'
</p>
<p>
tristate '  ARCnet COM90xx (RIM I) chipset driver'
</p>
<p>
tristate '  ARCnet COM20020 chipset driver'
</p>
<sect>
Ethernet (10 or 100Mbit)
<p>
bool 'Ethernet (10 or 100Mbit)'
</p>
<p>
tristate 'AM79C961A support'
</p>
<p>
tristate 'Acorn Ether1 (82586) support'
</p>
<p>
tristate 'Acorn/ANT Ether3 (NQ8005) support'
</p>
<p>
tristate 'I-cubed EtherH (NS8390) support'
</p>
<p>
tristate 'MACE (Power Mac ethernet) support'
</p>
<p>
tristate 'BMAC (G3 ethernet) support'
</p>
<p>
tristate 'Symbios 53c885 (Synergy ethernet) support'
</p>
<p>
tristate 'Ariadne support'
</p>
<p>
tristate 'Ariadne II support'
</p>
<p>
tristate 'A2065 support'
</p>
<p>
tristate 'Hydra support'
</p>
<p>
tristate 'MIPS JAZZ onboard SONIC Ethernet support'
</p>
<p>
bool '3COM cards'
</p>
<p>
tristate '3c501 support'
</p>
<p>
tristate '3c503 support'
</p>
<p>
tristate '3c505 support'
</p>
<p>
tristate '3c507 support'
</p>
<p>
tristate '3c523 support'
</p>
<p>
tristate '3c527 support'
</p>
<p>
tristate '3c509/3c579 support'
</p>
<p>
tristate '3c515 ISA Fast EtherLink'
</p>
<p>
tristate '3c590/3c900 series (592/595/597) &quot;Vortex/Boomerang&quot;
 support'
</p>
<p>
tristate 'AMD LANCE and PCnet (AT1500 and NE2100) support'
</p>
<p>
bool 'Western Digital/SMC cards'
</p>
<p>
tristate 'WD80*3 support'
</p>
<p>
tristate 'SMC Ultra MCA support'
</p>
<p>
tristate 'SMC Ultra support'
</p>
<p>
tristate 'SMC Ultra32 EISA support'
</p>
<p>
tristate 'SMC 9194 support'
</p>
<p>
bool 'Racal-Interlan (Micom) NI cards'
</p>
<p>
tristate 'NI5010 support'
</p>
<p>
tristate 'NI5210 support'
</p>
<p>
tristate 'NI6510 support'
</p>
<p>
tristate 'RealTek 8129/8139 (not 8019/8029!) support'
</p>
<p>
bool 'Other ISA cards'
</p>
<p>
tristate 'AT1700/1720 support (EXPERIMENTAL)'
</p>
<p>
tristate 'Cabletron E21xx support'
</p>
<p>
tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support'
</p>
<p>
tristate 'EtherWORKS 3 (DE203, DE204, DE205) support'
</p>
<p>
tristate 'EtherExpress 16 support'
</p>
<p>
tristate 'EtherExpressPro support'
</p>
<p>
tristate 'FMV-181/182/183/184 support'
</p>
<p>
tristate 'HP PCLAN+ (27247B and 27252A) support'
</p>
<p>
tristate 'HP PCLAN (27245 and other 27xxx series) support'
</p>
<p>
tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support'
</p>
<p>
tristate 'ICL EtherTeam 16i/32 support'
</p>
<p>
tristate 'NE2000/NE1000 support'
</p>
<p>
tristate 'SEEQ8005 support (EXPERIMENTAL)'
</p>
<p>
bool 'SK_G16 support'
</p>
<p>
tristate 'NE/2 (ne2000 MCA version) support'
</p>
<p>
tristate 'SKnet MCA support'
</p>
<p>
bool 'EISA, VLB, PCI and on board controllers'
</p>
<p>
tristate 'AMD PCnet32 (VLB and PCI) support'
</p>
<p>
tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)'
</p>
<p>
tristate 'Apricot Xen-II on board Ethernet'
</p>
<p>
tristate 'CS89x0 support'
</p>
<p>
tristate 'DM9102 PCI Fast Ethernet Adapter support (EXPERIMENTAL)'
</p>
<p>
tristate 'Generic DECchip &amp; DIGITAL EtherWORKS PCI/EISA'
</p>
<p>
tristate 'DECchip Tulip (dc21x4x) PCI support'
</p>
<p>
tristate 'Old DECchip Tulip (dc21x4x) PCI support'
</p>
<p>
tristate 'Digi Intl. RightSwitch SE-X support'
</p>
<p>
tristate 'EtherExpressPro/100 support'
</p>
<p>
tristate 'Mylex EISA LNE390A/B support (EXPERIMENTAL)'
</p>
<p>
tristate 'Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)'
</p>
<p>
tristate 'PCI NE2000 support'
</p>
<p>
tristate 'TI ThunderLAN support'
</p>
<p>
tristate 'VIA Rhine support'
</p>
<p>
tristate 'SiS 900/7016 PCI Fast Ethernet Adapter support'
</p>
<p>
tristate 'Racal-Interlan EISA ES3210 support (EXPERIMENTAL)'
</p>
<p>
tristate 'SMC EtherPower II (EXPERIMENTAL)'
</p>
<p>
bool 'Zenith Z-Note support (EXPERIMENTAL)'
</p>
<p>
bool 'Pocket and portable adaptors'
</p>
<p>
bool 'AT-LAN-TEC/RealTek pocket adaptor support'
</p>
<p>
tristate 'D-Link DE600 pocket adaptor support'
</p>
<p>
tristate 'D-Link DE620 pocket adaptor support'
</p>
<sect>
Ethernet (1000 Mbit)
<p>
tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support'
</p>
<p>
tristate 'Packet Engines Yellowfin Gigabit-NIC support'
</p>
<p>
tristate 'SysKonnect SK-98xx support'
</p>
<sect>
Appletalk devices
<p>
tristate 'Apple/Farallon LocalTalk PC support'
</p>
<p>
tristate 'COPS LocalTalk PC support'
</p>
<p>
bool 'Dayna firmware support'
</p>
<p>
bool 'Tangent firmware support'
</p>
<p>
tristate 'Appletalk-IP driver support'
</p>
<p>
bool 'IP to Appletalk-IP Encapsulation support'
</p>
<p>
bool 'Appletalk-IP to IP Decapsulation support'
</p>
<sect>
Token ring devices
<p>
bool 'Token Ring driver support'
</p>
<p>
tristate 'IBM Tropic chipset based adaptor support'
</p>
<p>
&num;  tristate 'IBM Lanstreamer PCI adaptor support'
</p>
<p>
tristate 'IBM Olympic chipset PCI adapter support'
</p>
<p>
tristate 'SysKonnect adapter support'
</p>
<sect>
Wan interfaces
<p>
tristate 'Comtrol Hostess SV-11 support'
</p>
<p>
tristate 'COSA/SRP sync serial boards support'
</p>
<p>
tristate 'Sealevel Systems 4021 support'
</p>
<p>
tristate 'MultiGate (COMX) synchronous serial boards support'
</p>
<p>
tristate '  Support for COMX/CMX/HiCOMX boards'
</p>
<p>
tristate '  Support for LoCOMX board'
</p>
<p>
tristate '  Support for MixCOM board'
</p>
<p>
tristate '  Support for HDLC and syncPPP protocols on MultiGate boards'
</p>
<p>
tristate '  Support for LAPB protocol on MultiGate boards'
</p>
<p>
tristate '  Support for LAPB protocol on MultiGate boards'
</p>
<p>
tristate '  Support for Frame Relay on MultiGate boards'
</p>
<p>
tristate 'Frame relay DLCI support'
</p>
<p>
int '  Max open DLCI'
</p>
<p>
int '  Max DLCI per device'
</p>
<p>
tristate '  SDLA (Sangoma S502/S508) support'
</p>
<p>
bool 'WAN drivers'
</p>
<p>
tristate 'Sangoma WANPIPE(tm) multi-prot cards: (select M not Y !)'
</p>
<p>
int  '  Maximum number of cards'
</p>
<p>
&num;bool '  WANPIPE X.25 support'
</p>
<p>
bool '  WANPIPE Frame Relay support'
</p>
<p>
bool '  WANPIPE PPP support'
</p>
<p>
bool '  WANPIPE Cisco HDLC support'
</p>
<sect>
Amateur Radio support
<p>
bool 'Amateur Radio support'
</p>
<p>
tristate 'Amateur Radio AX.25 Level 2 protocol'
</p>
<p>
bool '   AX.25 DAMA Slave support'
</p>
<p>
&num;     bool '   AX.25 DAMA Master support'
</p>
<p>
tristate '   Amateur Radio NET/ROM protocol'
</p>
<p>
tristate '   Amateur Radio X.25 PLP (Rose)'
</p>
<p>
tristate 'Serial port KISS driver'
</p>
<p>
tristate 'Serial port 6PACK driver'
</p>
<p>
tristate 'BPQ Ethernet driver'
</p>
<p>
tristate 'High-speed (DMA) SCC driver for AX.25'
</p>
<p>
dep_tristate 'Z8530 SCC driver'
</p>
<p>
bool '   additional delay for PA0HZP OptoSCC compatible boards'
</p>
<p>
bool '   support for TRX that feedback the tx signal to rx'
</p>
<p>
tristate 'BAYCOM ser12 fullduplex driver for AX.25'
</p>
<p>
tristate 'BAYCOM ser12 halfduplex driver for AX.25'
</p>
<p>
tristate 'BAYCOM picpar and par96 driver for AX.25'
</p>
<p>
tristate 'BAYCOM epp driver for AX.25'
</p>
<p>
tristate 'Soundcard modem driver'
</p>
<p>
bool '   soundmodem support for Soundblaster and compatible cards'
</p>
<p>
bool '   soundmodem support for WSS and Crystal cards'
</p>
<p>
bool '   soundmodem support for 1200 baud AFSK modulation'
</p>
<p>
bool '   soundmodem support for 2400 baud AFSK modulation (7.3728MHz crystal)'
</p>
<p>
bool '   soundmodem support for 2400 baud AFSK modulation (8MHz crystal)'
</p>
<p>
bool '   soundmodem support for 2666 baud AFSK modulation'
</p>
<p>
bool '   soundmodem support for 4800 baud HAPN-1 modulation'
</p>
<p>
bool '   soundmodem support for 4800 baud PSK modulation'
</p>
<p>
bool '   soundmodem support for 9600 baud FSK G3RUH modulation'
</p>
<p>
tristate 'YAM driver for AX.25'
</p>
<p>
tristate 'Shortwave radio modem driver'
</p>
<p>
bool '   HFmodem support for Soundblaster and compatible cards'
</p>
<p>
bool '   HFmodem support for WSS and Crystal cards'
</p>
<sect>
IrDA subsystem support
<p>
tristate 'IrDA subsystem support'
</p>
<p>
tristate 'IrLAN protocol'
</p>
<p>
tristate 'IrCOMM protocol'
</p>
<p>
tristate 'IrLPT protocol'
</p>
<p>
tristate '   IrLPT client support'
</p>
<p>
tristate '   IrLPT server support'
</p>
<p>
bool 'IrDA protocol options'
</p>
<p>
bool '   Cache last LSAP'
</p>
<p>
bool '   Fast RRs'
</p>
<p>
bool '   Debug information'
</p>
<p>
bool 'IrLAP compression'
</p>
<p>
tristate '   Deflate compression (experimental)'
</p>
<p>
&num;       tristate '   BZIP2 compression'
</p>
<p>
&num;       tristate '   BSD compression'
</p>
<sect>
infrared-port device drivers
<p>
tristate 'IrTTY (uses Linux serial driver)'
</p>
<p>
tristate 'IrPORT (IrDA serial driver)'
</p>
<p>
tristate 'NSC PC87108'
</p>
<p>
tristate 'Winbond W83977AF (IR)'
</p>
<p>
tristate 'Sharp UIRCC'
</p>
<p>
tristate 'Toshiba Type-O IR Port'
</p>
<p>
tristate 'SMC IrCC'
</p>
<p>
bool 'Serial dongle support'
</p>
<p>
tristate '   ESI JetEye PC dongle'
</p>
<p>
tristate '   ACTiSYS IR-220L and IR220L+ dongle'
</p>
<p>
tristate '   Tekram IrMate 210B dongle'
</p>
<p>
tristate '   Greenwich GIrBIL dongle'
</p>
<p>
tristate '   Parallax LiteLink dongle'
</p>
<sect>
ISDN subsystem
<p>
tristate 'ISDN support'
</p>
<p>
bool '  Support synchronous PPP'
</p>
<p>
bool '    Use VJ-compression with synchronous PPP'
</p>
<p>
bool '    Support generic MP (RFC 1717)'
</p>
<p>
bool '  Support audio via ISDN'
</p>
<p>
bool '    Support AT-Fax Class 2 commands'
</p>
<p>
bool '  Support isdn diversion services'
</p>
<p>
bool '  X.25 PLP on top of ISDN'
</p>
<p>
tristate '  ICN 2B and 4B support'
</p>
<p>
tristate '  isdnloop support'
</p>
<p>
tristate '  PCBIT-D support'
</p>
<p>
tristate '  HiSax SiemensChipSet driver support'
</p>
<p>
bool '    HiSax Support for EURO/DSS1'
</p>
<p>
bool '      Support for german chargeinfo'
</p>
<p>
bool '      Disable sending complete'
</p>
<p>
bool '      Disable sending low layer compatibility'
</p>
<p>
bool '    HiSax Support for german 1TR6'
</p>
<p>
bool '    HiSax Support for Teles 16.0/8.0'
</p>
<p>
bool '    HiSax Support for Teles 16.3 or PNP or PCMCIA'
</p>
<p>
bool '    HiSax Support for Teles PCI'
</p>
<p>
bool '    HiSax Support for Teles S0Box'
</p>
<p>
bool '    HiSax Support for AVM A1 (Fritz)'
</p>
<p>
bool '    HiSax Support for AVM PnP/PCI (Fritz!PnP/PCI)'
</p>
<p>
bool '    HiSax Support for AVM A1 PCMCIA (Fritz)'
</p>
<p>
bool '    HiSax Support for Elsa cards' CONFIG_HISAX_ELSA
</p>
<p>
bool '    HiSax Support for ITK ix1-micro Revision 2'
</p>
<p>
bool '    HiSax Support for Eicon.Diehl Diva cards'
</p>
<p>
bool '    HiSax Support for ASUSCOM cards'
</p>
<p>
bool '    HiSax Support for TELEINT cards'
</p>
<p>
bool '    HiSax Support for HFC-S based cards'
</p>
<p>
bool '    HiSax Support for Sedlbauer cards'
</p>
<p>
bool '    HiSax Support for USR Sportster internal TA'
</p>
<p>
bool '    HiSax Support for MIC card'
</p>
<p>
bool '    HiSax Support for NETjet card'
</p>
<p>
bool '    HiSax Support for Niccy PnP/PCI card'
</p>
<p>
bool '    HiSax Support for Siemens I-Surf card'
</p>
<p>
bool '    HiSax Support for HST Saphir card'
</p>
<p>
bool '    HiSax Support for Telekom A4T card'
</p>
<p>
bool '    HiSax Support for Scitel Quadro card'
</p>
<p>
bool '    HiSax Support for Gazel cards'
</p>
<p>
bool '    HiSax Support for HFC PCI-Bus cards'
</p>
<p>
bool '    HiSax Support for Winbond W6692 based cards'
</p>
<p>
&num;      bool '    HiSax Support for TESTEMULATOR (EXPERIMENTAL)'
</p>
<p>
bool '    HiSax Support for Am7930'
</p>
<p>
tristate '  Spellcaster support (EXPERIMENTAL)'
</p>
<p>
tristate '  IBM Active 2000 support (EXPERIMENTAL)'
</p>
<p>
tristate '  Eicon.Diehl active card support'
</p>
<p>
bool '    Eicon S,SX,SCOM,Quadro,S2M support'
</p>
<p>
tristate '  AVM CAPI2.0 support'
</p>
<p>
bool '    AVM B1 ISA support'
</p>
<p>
bool '    AVM B1 PCI support'
</p>
<p>
bool '    AVM T1/T1-B ISA support'
</p>
<p>
bool '    AVM B1/M1/M2 PCMCIA support'
</p>
<p>
bool '    AVM T1/T1-B PCI support'
</p>
<p>
bool '    Verbose reason code reporting (kernel size +=7K)'
</p>
<sect>
Old CD-ROM drivers (not SCSI, not IDE)
<p>
bool 'Support non-SCSI/IDE/ATAPI CDROM drives'
</p>
<p>
tristate 'Aztech/Orchid/Okano/Wearnes/TXC/CyDROM  CDROM support'
</p>
<p>
tristate 'Goldstar R420 CDROM support'
</p>
<p>
tristate 'Matsushita/Panasonic/Creative, Longshine, TEAC CDROM support'
</p>
<p>
bool 'Matsushita/Panasonic, ... second CDROM controller support'
</p>
<p>
bool 'Matsushita/Panasonic, ... third CDROM controller support'
</p>
<p>
bool 'Matsushita/Panasonic, ... fourth CDROM controller support'
</p>
<p>
tristate 'Mitsumi (standard) &lsqb;no XA/Multisession&rsqb; CDROM support'
</p>
<p>
int 'MCD IRQ'
</p>
<p>
hex 'MCD I/O base'
</p>
<p>
tristate 'Mitsumi &lsqb;XA/MultiSession&rsqb; CDROM support'
</p>
<p>
tristate 'Optics Storage DOLPHIN 8000AT CDROM support'
</p>
<p>
tristate 'Philips/LMS CM206 CDROM support'
</p>
<p>
tristate 'Sanyo CDR-H94A CDROM support'
</p>
<p>
tristate 'ISP16/MAD16/Mozart soft configurable cdrom interface support'
</p>
<p>
tristate 'Sony CDU31A/CDU33A CDROM support'
</p>
<p>
tristate 'Sony CDU535 CDROM support'
</p>
<sect>
Character devices
<p>
bool 'Virtual terminal'
</p>
<p>
bool 'Support for console on virtual terminal'
</p>
<p>
tristate 'Standard/generic (dumb) serial support'
</p>
<p>
bool '   Support for console on serial port'
</p>
<p>
bool 'Extended dumb serial driver options'
</p>
<p>
bool '   Support more than 4 serial ports'
</p>
<p>
bool '   Support for sharing serial interrupts'
</p>
<p>
bool '   Autodetect IRQ on standard ports (unsafe)'
</p>
<p>
bool '   Support special multiport boards'
</p>
<p>
bool '   Support the Bell Technologies HUB6 card'
</p>
<p>
bool 'Non-standard serial port support'
</p>
<p>
tristate 'Computone IntelliPort Plus serial support'
</p>
<p>
tristate 'Comtrol Rocketport support'
</p>
<p>
tristate 'Cyclades async mux support'
</p>
<p>
bool '  Cyclades-Z interrupt mode operation (EXPERIMENTAL)'
</p>
<p>
tristate 'Digiboard Intelligent Async Support'
</p>
<p>
tristate 'Digiboard PC/Xx Support'
</p>
<p>
tristate 'Hayes ESP serial port support'
</p>
<p>
tristate 'Moxa Intellio support'
</p>
<p>
tristate 'Moxa SmartIO support'
</p>
<p>
tristate 'Multi-Tech multiport card support'
</p>
<p>
tristate 'SDL RISCom/8 card support'
</p>
<p>
tristate 'Specialix IO8+ card support'
</p>
<p>
bool 'Specialix DTR/RTS pin is RTS'
</p>
<p>
tristate 'Specialix SX (and SI) card support'
</p>
<p>
bool 'Stallion multiport serial support'
</p>
<p>
tristate '  Stallion EasyIO or EC8/32 support'
</p>
<p>
tristate '  Stallion EC8/64, ONboard, Brumby support'
</p>
<p>
dep_tristate 'Microgate SyncLink card support'
</p>
<p>
dep_tristate 'HDLC line discipline support'
</p>
<p>
bool 'Unix98 PTY support'
</p>
<p>
int 'Maximum number of Unix98 PTYs in use (0-2048)'
</p>
<p>
tristate 'Parallel printer support'
</p>
<p>
bool '  Support IEEE1284 status readback'
</p>
<p>
bool 'Mouse Support (not serial mice)'
</p>
<p>
tristate 'QIC-02 tape support'
</p>
<p>
bool 'Do you want runtime configuration for QIC-02'
</p>
<p>
bool 'Watchdog Timer Support'
</p>
<p>
tristate '/dev/nvram support'
</p>
<p>
bool 'Enhanced Real Time Clock Support'
</p>
<p>
bool 'Tadpole ANA H8 Support'
</p>
<p>
tristate 'Double Talk PC internal speech card support'
</p>
<sect>
Mice
<p>
tristate 'ATIXL busmouse support'
</p>
<p>
tristate 'Logitech busmouse support'
</p>
<p>
tristate 'Microsoft busmouse support'
</p>
<p>
bool 'PS/2 mouse (aka &quot;auxiliary device&quot;) support'
</p>
<p>
tristate 'C&amp;T 82C710 mouse port support (as on TI Travelmate)'
</p>
<p>
tristate 'PC110 digitizer pad support'
</p>
<sect>
Joysticks
<p>
tristate 'Joystick support'
</p>
<p>
dep_tristate '  Classic PC analog'
</p>
<p>
dep_tristate '  FPGaming and MadCatz A3D'
</p>
<p>
dep_tristate '  Gravis GrIP'
</p>
<p>
dep_tristate '  Logitech ADI'
</p>
<p>
dep_tristate '  Microsoft SideWinder'
</p>
<p>
dep_tristate '  ThrustMaster DirectConnect'
</p>
<p>
dep_tristate '  Creative Labs Blaster'
</p>
<p>
dep_tristate '  PDPI Lightning 4 card'
</p>
<p>
dep_tristate '  Trident 4DWave and Aureal Vortex gameport'
</p>
<p>
dep_tristate '  Magellan and Space Mouse'
</p>
<p>
dep_tristate '  SpaceTec SpaceOrb 360 and SpaceBall Avenger'
</p>
<p>
dep_tristate '  SpaceTec SpaceBall 4000 FLX'
</p>
<p>
dep_tristate '  Logitech WingMan Warrior'
</p>
<p>
dep_tristate '  NES, SNES, PSX, N64, Multi'
</p>
<p>
dep_tristate '  Sega, Multi'
</p>
<p>
dep_tristate '  TurboGraFX interface'
</p>
<p>
dep_tristate '  Amiga joysticks'
</p>
<sect>
Watchdog Cards
<p>
bool '   Disable watchdog shutdown on close'
</p>
<p>
tristate '   WDT Watchdog timer'
</p>
<p>
bool '       WDT501 features'
</p>
<p>
bool '       Fan Tachometer'
</p>
<p>
tristate '   Software Watchdog'
</p>
<p>
tristate '   Berkshire Products PC Watchdog'
</p>
<p>
tristate '   Acquire SBC Watchdog Timer'
</p>
<p>
tristate '   Mixcom Watchdog'
</p>
<sect>
Video For Linux
<p>
tristate 'Video For Linux'
</p>
<p>
tristate 'AIMSlab RadioTrack (aka RadioReveal) support'
</p>
<p>
hex '  RadioTrack i/o port (0x20f or 0x30f)'
</p>
<p>
tristate 'AIMSlab RadioTrack II support'
</p>
<p>
hex '  RadioTrack II i/o port (0x20c or 0x30c)'
</p>
<p>
tristate 'Aztech/Packard Bell Radio'
</p>
<p>
hex '  Aztech/Packard Bell I/O port (0x350 or 0x358)'
</p>
<p>
tristate 'ADS Cadet AM/FM Tuner'
</p>
<p>
tristate 'Miro PCM20 Radio'
</p>
<p>
tristate 'GemTek Radio Card support'
</p>
<p>
hex '  GemTek i/o port (0x20c, 0x30c, 0x24c or 0x34c)'
</p>
<p>
tristate 'Trust FM Radio'
</p>
<p>
hex '  Trust FM Radio I/O port (0x350 or 0x358)'
</p>
<p>
tristate 'BT848 Video For Linux'
</p>
<p>
tristate 'Quickcam BW Video For Linux'
</p>
<p>
tristate 'Colour QuickCam Video For Linux (EXPERIMENTAL)'
</p>
<p>
tristate 'Mediavision Pro Movie Studio Video For Linux'
</p>
<p>
tristate 'PlanB Video-In on PowerMac'
</p>
<p>
tristate 'SAA5249 Teletext processor'
</p>
<p>
tristate 'SF16FMI Radio'
</p>
<p>
hex '  SF16FMI I/O port (0x284 or 0x384)'
</p>
<p>
tristate 'SGI Vino Video For Linux (EXPERIMENTAL)'
</p>
<p>
tristate 'Typhoon Radio (a.k.a. EcoRadio)'
</p>
<p>
bool '  Support for /proc/radio-typhoon'
</p>
<p>
hex '  Typhoon I/O port (0x316 or 0x336)'
</p>
<p>
int '  Typhoon frequency set when muting the device (kHz)'
</p>
<p>
tristate 'Zoltrix Radio'
</p>
<p>
hex '  ZOLTRIX I/O port (0x20c or 0x30c)'
</p>
<p>
tristate 'Zoran ZR36057/36060 support'
</p>
<p>
dep_tristate ' Include support for Iomega Buz'
</p>
<p>
&num;dep_tristate '  Include support for LML33'
</p>
<sect>
Ftape, the floppy tape device driver
<p>
tristate 'Ftape (QIC-80/Travan) support'
</p>
<p>
tristate 'Zftape, the VFS interface'
</p>
<p>
int 'Default block size'
</p>
<p>
int 'Number of ftape buffers (EXPERIMENTAL)'
</p>
<p>
bool 'Enable procfs status report (+2kb)'
</p>
<p>
choice 'Debugging output'
</p>
<p>
         Normal
</p>
<p>
         Excessive
</p>
<p>
         Reduced
</p>
<p>
         None
</p>
<p>
choice 'Floppy tape controllers'
</p>
<p>
         Standard
</p>
<p>
         MACH-2
</p>
<p>
         FC-10/FC-20
</p>
<p>
         Alt/82078
</p>
<p>
hex ' IO base of the floppy disk controller'
</p>
<p>
int '   IRQ channel of the floppy disk controller'
</p>
<p>
int '   DMA channel of the floppy disk controller'
</p>
<p>
int 'Default FIFO threshold (EXPERIMENTAL)'
</p>
<p>
int 'Maximal data rate to use (EXPERIMENTAL)'
</p>
<p>
int 'CPU clock frequency of your DEC Alpha'
</p>
<sect>
USB drivers - not for the faint of heart
<p>
tristate 'Support for USB (EXPERIMENTAL!)'
</p>
<p>
bool 'UHCI (intel PIIX4 and others) support?'
</p>
<p>
bool 'OHCI (compaq and some others) support?'
</p>
<p>
bool 'OHCI-HCD (other OHCI opt. Virt. Root Hub) support?'
</p>
<p>
bool 'OHCI-HCD Virtual Root Hub'
</p>
<p>
bool 'USB mouse support'
</p>
<p>
bool 'USB keyboard support'
</p>
<p>
bool 'USB audio parsing support'
</p>
<sect>
Filesystems
<p>
bool     'Quota support'
</p>
<p>
tristate 'Kernel automounter support'
</p>
<p>
tristate 'ADFS filesystem support (read only) (EXPERIMENTAL)'
</p>
<p>
tristate 'Amiga FFS filesystem support'
</p>
<p>
tristate 'Apple Macintosh filesystem support (experimental)'
</p>
<p>
tristate 'DOS FAT fs support'
</p>
<p>
tristate '  MSDOS fs support'
</p>
<p>
tristate '  UMSDOS: Unix-like filesystem on top of standard MSDOS file
 system'
</p>
<p>
tristate '  VFAT (Windows-95) fs support'
</p>
<p>
tristate 'ISO 9660 CDROM filesystem support'
</p>
<p>
bool 'Microsoft Joliet CDROM extensions'
</p>
<p>
tristate 'Minix fs support'
</p>
<p>
tristate 'NTFS filesystem support (read only)'
</p>
<p>
bool '   NTFS read-write support (DANGEROUS)'
</p>
<p>
tristate 'OS/2 HPFS filesystem support (read only)'
</p>
<p>
bool '/proc filesystem support'
</p>
<p>
bool '/dev/pts filesystem for Unix98 PTYs'
</p>
<p>
tristate 'QNX filesystem support (EXPERIMENTAL)'
</p>
<p>
bool '   QNXFS read-write support (FOR TESTING ONLY)'
</p>
<p>
tristate 'ROM filesystem support'
</p>
<p>
tristate 'Second extended fs support'
</p>
<p>
tristate 'System V and Coherent filesystem support'
</p>
<p>
tristate 'UFS filesystem support'
</p>
<p>
bool '   UFS filesystem write support (experimental)'
</p>
<p>
tristate 'SGI EFS filesystem support (read only) (experimental)'
</p>
<sect>
Network File Systems
<p>
tristate 'Coda filesystem support (advanced network fs)'
</p>
<p>
tristate 'NFS filesystem support'
</p>
<p>
bool '   Root file system on NFS'
</p>
<p>
tristate 'NFS server support'
</p>
<p>
bool '   Emulate SUN NFS server'
</p>
<p>
tristate 'SMB filesystem support (to mount WfW shares etc.)'
</p>
<p>
tristate 'NCP filesystem support (to mount NetWare volumes)'
</p>
<p>
bool     '   Packet signatures'
</p>
<p>
bool     '   Proprietary file locking'
</p>
<p>
bool     '   Clear remove/delete inhibit when needed'
</p>
<p>
bool     '   Use NFS namespace if available'
</p>
<p>
bool     '   Use LONG (OS/2) namespace if available'
</p>
<p>
bool   '      Lowercase DOS filenames'
</p>
<p>
bool     '   Allow mounting of volume subdirectories'
</p>
<p>
&num; bool     '   NDS interserver authentication support'
</p>
<p>
bool     '   Use Native Language Support'
</p>
<p>
bool     '   Enable symbolic links and execute flags'
</p>
<sect>
Partition Types
<p>
bool 'BSD disklabel (BSD partition tables) support'
</p>
<p>
bool 'Macintosh partition map support'
</p>
<p>
bool 'SMD disklabel (Sun partition tables) support'
</p>
<p>
bool 'Solaris (x86) partition table support'
</p>
<p>
bool 'Unixware slices support (EXPERIMENTAL)'
</p>
<sect>
Native Language Support
<p>
tristate 'Codepage 437 (United States, Canada)'
</p>
<p>
tristate 'Codepage 737 (Greek)'
</p>
<p>
tristate 'Codepage 775 (Baltic Rim)'
</p>
<p>
tristate 'Codepage 850 (Europe)'
</p>
<p>
tristate 'Codepage 852 (Central/Eastern Europe)'
</p>
<p>
tristate 'Codepage 855 (Cyrillic)'
</p>
<p>
tristate 'Codepage 857 (Turkish)'
</p>
<p>
tristate 'Codepage 860 (Portugese)'
</p>
<p>
tristate 'Codepage 861 (Icelandic)'
</p>
<p>
tristate 'Codepage 862 (Hebrew)'
</p>
<p>
tristate 'Codepage 863 (Canadian French)'
</p>
<p>
tristate 'Codepage 864 (Arabic)'
</p>
<p>
tristate 'Codepage 865 (Norwegian, Danish)'
</p>
<p>
tristate 'Codepage 866 (Cyrillic/Russian)'
</p>
<p>
tristate 'Codepage 869 (Greek)'
</p>
<p>
tristate 'Codepage 874 (Thai)'
</p>
<p>
tristate 'NLS ISO 8859-1  (Latin 1; Western European Languages)'
</p>
<p>
tristate 'NLS ISO 8859-2  (Latin 2; Slavic/Central European Languages)'
</p>
<p>
tristate 'NLS ISO 8859-3  (Latin 3; Esperanto, Galician, Maltese, Turkish)'
</p>
<p>
tristate 'NLS ISO 8859-4  (Latin 4; Estonian, Latvian, Lithuanian)'
</p>
<p>
tristate 'NLS ISO 8859-5  (Cyrillic)'
</p>
<p>
tristate 'NLS ISO 8859-6  (Arabic)'
</p>
<p>
tristate 'NLS ISO 8859-7  (Modern Greek)'
</p>
<p>
tristate 'NLS ISO 8859-8  (Hebrew)'
</p>
<p>
tristate 'NLS ISO 8859-9  (Latin 5; Turkish)'
</p>
<p>
tristate 'NLS ISO 8859-14 (Latin 8; Celtic)'
</p>
<p>
tristate 'NLS ISO 8859-15 (Latin 9; Western European Languages with Euro)'
</p>
<p>
tristate 'NLS KOI8-R (Russian)'
</p>
<sect>
Console drivers
<p>
bool 'VGA text console'
</p>
<p>
bool 'Video mode selection support'
</p>
<p>
tristate 'MDA text console (dual-headed) (EXPERIMENTAL)'
</p>
<p>
bool 'Support for frame buffer devices (EXPERIMENTAL)'
</p>
<p>
bool 'Permedia2 support (experimental)'
</p>
<p>
bool '  enable FIFO disconnect feature'
</p>
<p>
bool '  generic Permedia2 PCI board support'
</p>
<p>
bool '  Phase5 CVisionPPC/BVisionPPC support'
</p>
<p>
bool 'Acorn VIDC support'
</p>
<p>
tristate 'Cyber2000 support' CONFIG_FB_CYBER2000
</p>
<p>
bool 'Amiga native chipset support'
</p>
<p>
bool 'Amiga OCS chipset support'
</p>
<p>
bool 'Amiga ECS chipset support'
</p>
<p>
bool 'Amiga AGA chipset support'
</p>
<p>
tristate 'Amiga CyberVision support'
</p>
<p>
bool 'Amiga CyberVision3D support (experimental)'
</p>
<p>
tristate 'Amiga RetinaZ3 support'
</p>
<p>
tristate 'Amiga CLgen driver'
</p>
<p>
bool 'Amiga FrameMaster II/Rainbow II support (experimental)'
</p>
<p>
bool 'Atari native chipset support'
</p>
<p>
bool 'ATI Mach64 display support'
</p>
<p>
bool 'Open Firmware frame buffer device support'
</p>
<p>
bool 'Apple &quot;control&quot; display support'
</p>
<p>
bool 'Apple &quot;platinum&quot; display support'
</p>
<p>
bool 'Apple &quot;valkyrie&quot; display support'
</p>
<p>
bool 'IMS Twin Turbo display support'
</p>
<p>
bool 'Chips 65550 display support'
</p>
<p>
bool 'S3 Trio display support'
</p>
<p>
tristate 'TGA framebuffer support'
</p>
<p>
bool 'VESA VGA graphics console'
</p>
<p>
bool 'VGA 16-color graphics console'
</p>
<p>
tristate 'SGI Visual Workstation framebuffer support'
</p>
<p>
tristate 'Matrox acceleration'
</p>
<p>
bool '  Millennium I/II support'
</p>
<p>
bool '  Mystique support'
</p>
<p>
bool '  G100/G200 support'
</p>
<p>
bool '  Multihead support'
</p>
<p>
bool 'ATI Mach64 display support'
</p>
<p>
bool 'SBUS and UPA framebuffers'
</p>
<p>
bool '  Creator/Creator3D support'
</p>
<p>
bool '  CGsix (GX,TurboGX) support'
</p>
<p>
bool '  BWtwo support'
</p>
<p>
bool '  CGthree support'
</p>
<p>
bool '  TCX (SS4/SS5 only) support'
</p>
<p>
bool '  CGfourteen (SX) support'
</p>
<p>
bool '  Leo (ZX) support'
</p>
<p>
bool 'PCI framebuffers'
</p>
<p>
bool '  IGA 168x display support'
</p>
<p>
bool 'PCI framebuffers'
</p>
<p>
bool '  ATI Mach64 display support'
</p>
<p>
tristate 'Virtual Frame Buffer support (ONLY FOR TESTING!)'
</p>
<p>
bool 'Advanced low level driver options'
</p>
<p>
tristate 'Monochrome support'
</p>
<p>
tristate '2 bpp packed pixels support'
</p>
<p>
tristate '4 bpp packed pixels support'
</p>
<p>
tristate '8 bpp packed pixels support'
</p>
<p>
tristate '16 bpp packed pixels support'
</p>
<p>
tristate '24 bpp packed pixels support'
</p>
<p>
tristate '32 bpp packed pixels support'
</p>
<p>
tristate 'Amiga bitplanes support'
</p>
<p>
tristate 'Amiga interleaved bitplanes support'
</p>
<p>
tristate 'Atari interleaved bitplanes (2 planes) support'
</p>
<p>
tristate 'Atari interleaved bitplanes (4 planes) support'
</p>
<p>
tristate 'Atari interleaved bitplanes (8 planes) support'
</p>
<p>
&num;   tristate 'Atari interleaved bitplanes (16 planes) support'
</p>
<p>
tristate 'Mac variable bpp packed pixels support'
</p>
<p>
bool 'VGA 16-color planar support'
</p>
<p>
tristate 'VGA characters/attributes support'
</p>
<p>
bool 'Support only 8 pixels wide fonts'
</p>
<p>
bool 'Sparc console 8x16 font' CONFIG_FONT_SUN8x16
</p>
<p>
bool 'Sparc console 12x22 font (not supported by all drivers)'
</p>
<p>
bool 'Select other fonts'
</p>
<p>
bool '  VGA 8x8 font'
</p>
<p>
bool '  VGA 8x16 font'
</p>
<p>
bool '  Mac console 6x11 font (not supported by all drivers)'
</p>
<p>
bool '  Pearl (old m68k) console 8x8 font'
</p>
<p>
bool '  Acorn console 8x8 font'
</p>
<p>
bool 'Select compiled-in fonts'
</p>
<p>
bool '  VGA 8x8 font'
</p>
<p>
bool '  VGA 8x16 font'
</p>
<p>
bool '  Sparc console 8x16 font'
</p>
<p>
bool '  Sparc console 12x22 font (not supported by all drivers)'
</p>
<p>
bool '  Mac console 6x11 font (not supported by all drivers)'
</p>
<p>
bool '  Pearl (old m68k) console 8x8 font'
</p>
<p>
bool '  Acorn console 8x8 font'
</p>
<sect>
Sound
<p>
tristate 'Sound card support'
</p>
<p>
tristate 'Support for C-Media PCI audio chips (Experimental)'
</p>
<p>
bool 'Enable legacy FM'
</p>
<p>
bool 'Enable legacy MPU-401'
</p>
<p>
dep_tristate 'Ensoniq AudioPCI (ES1370)'
</p>
<p>
bool 'Joystick support at boot time'
</p>
<p>
dep_tristate 'Creative Ensoniq AudioPCI 97 (ES1371)'
</p>
<p>
bool 'Joystick support at boot time'
</p>
<p>
hex 'Gameport I/O 200,208,210,218'
</p>
<p>
tristate 'ESS Maestro'
</p>
<p>
tristate 'ESS Solo1 (Experimental)'
</p>
<p>
tristate 'S3 SonicVibes'
</p>
<p>
tristate 'SGI Visual Workstation Sound'
</p>
<p>
tristate 'Support for Turtle Beach MultiSound Classic, Tahiti, Monterey'
</p>
<p>
int 'MSND Classic IRQ 5,7,9,10,11,12'
</p>
<p>
hex 'MSND Classic memory B0000,C8000,D0000,D8000,E0000,E8000'
</p>
<p>
hex 'MSND Classic I/O 210,220,230,240,250,260,290,3E0'
</p>
<p>
tristate 'Support for Turtle Beach MultiSound Pinnacle, Fiji'
</p>
<p>
int 'MSND Pinnacle IRQ 5,7,9,10,11,12'
</p>
<p>
hex 'MSND Pinnacle memory B0000,C8000,D0000,D8000,E0000,E8000'
</p>
<p>
hex 'MSND Pinnacle I/O 210,220,230,240,250,260,290,3E0'
</p>
<p>
bool 'MSND Pinnacle has S/PDIF I/O'
</p>
<p>
bool 'MSND Pinnacle non-PnP Mode'
</p>
<p>
hex 'MSND Pinnacle config port 250,260,270'
</p>
<p>
hex 'MSND Pinnacle MPU I/O (e.g. 330)'
</p>
<p>
int 'MSND Pinnacle MPU IRQ (e.g. 9)'
</p>
<p>
hex 'MSND Pinnacle IDE I/O 0 (e.g. 170)'
</p>
<p>
hex 'MSND Pinnacle IDE I/O 1 (e.g. 376)'
</p>
<p>
int 'MSND Pinnacle IDE IRQ (e.g. 15)'
</p>
<p>
hex 'MSND Pinnacle joystick I/O (e.g. 200)'
</p>
<p>
int 'MSND buffer size (kB)'
</p>
<p>
tristate 'OSS sound modules'
</p>
<p>
bool 'Persistent DMA buffers'
</p>
<p>
tristate 'ProAudioSpectrum 16 support'
</p>
<p>
int 'PAS16 IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14 or 15'
</p>
<p>
int 'PAS16 DMA 0, 1, 3, 5, 6 or 7'
</p>
<p>
bool 'Enable PAS16 joystick port'
</p>
<p>
tristate '100&percnt; Sound Blaster compatibles (SB16/32/64, ESS, Jazz16)
 support'
</p>
<p>
hex 'I/O base for SB Check from manual of the card'
</p>
<p>
int 'Sound Blaster IRQ Check from manual of the card'
</p>
<p>
int 'Sound Blaster DMA 0, 1 or 3'
</p>
<p>
int 'Sound Blaster 16 bit DMA (SB16, Jazz16, SMW) 5, 6 or 7 (use 1 for
 8 bit cards)'
</p>
<p>
hex 'MPU401 I/O base of SB16, Jazz16 and ES1688 Check from manual of the
 card'
</p>
<p>
int 'SB MPU401 IRQ (Jazz16, SM Wave and ES1688) Check from manual of the
 card'
</p>
<p>
tristate 'Gravis Ultrasound support'
</p>
<p>
bool '16 bit sampling option of GUS (_NOT_ GUS MAX)'
</p>
<p>
bool 'GUS MAX support'
</p>
<p>
hex 'I/O base for GUS 210, 220, 230, 240, 250 or 260'
</p>
<p>
int 'GUS IRQ 3, 5, 7, 9, 11, 12 or 15'
</p>
<p>
int 'GUS DMA 1, 3, 5, 6 or 7'
</p>
<p>
int 'Second DMA channel for GUS 1, 3, 5, 6 or 7'
</p>
<p>
hex 'I/O base for the 16 bit daughtercard of GUS 530, 604, E80 or F40'
</p>
<p>
int 'GUS 16 bit daughtercard IRQ 3, 4, 5, 7, or 9'
</p>
<p>
int 'GUS DMA 0, 1 or 3'
</p>
<p>
tristate 'MPU-401 support (NOT for SB16)'
</p>
<p>
hex 'I/O base for MPU401 Check from manual of the card'
</p>
<p>
int 'MPU401 IRQ Check from manual of the card'
</p>
<p>
tristate 'PSS (AD1848, ADSP-2115, ESC614) support'
</p>
<p>
hex 'PSS I/O base 220 or 240'
</p>
<p>
hex 'PSS audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'PSS audio IRQ 7, 9, 10 or 11'
</p>
<p>
int 'PSS audio DMA 0, 1 or 3'
</p>
<p>
hex 'PSS MIDI I/O base '
</p>
<p>
int 'PSS MIDI IRQ 3, 4, 5, 7, 9, 10, 11, 12'
</p>
<p>
bool '  Have DSPxxx.LD firmware file'
</p>
<p>
string '  Full pathname of DSPxxx.LD firmware file'
</p>
<p>
bool '  Enable PSS mixer (Beethoven ADSP-16 and other compatibile)'
</p>
<p>
tristate 'Microsoft Sound System support'
</p>
<p>
bool '  Enable support for the SoundPro mixer'
</p>
<p>
hex 'MSS/WSS I/O base 530, 604, E80 or F40'
</p>
<p>
int 'MSS/WSS IRQ 7, 9, 10 or 11'
</p>
<p>
int 'MSS/WSS DMA 0, 1 or 3'
</p>
<p>
int 'MSS/WSS second DMA (if possible) 0, 1 or 3'
</p>
<p>
tristate 'Ensoniq SoundScape support'
</p>
<p>
hex 'SoundScape MIDI I/O base 320, 330, 340 or 350'
</p>
<p>
int 'SoundScape MIDI IRQ '
</p>
<p>
int 'SoundScape initialization DMA 0, 1 or 3'
</p>
<p>
hex 'SoundScape audio I/O base 534, 608, E84 or F44'
</p>
<p>
int 'SoundScape audio IRQ 7, 9, 10 or 11'
</p>
<p>
tristate 'MediaTrix AudioTrix Pro support'
</p>
<p>
hex 'TRIX audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'TRIX audio IRQ 7, 9, 10 or 11'
</p>
<p>
int 'TRIX audio DMA 0, 1 or 3'
</p>
<p>
int 'TRIX second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'TRIX MIDI I/O base 330, 370, 3B0 or 3F0'
</p>
<p>
int 'TRIX MIDI IRQ 3, 4, 5, 7 or 9'
</p>
<p>
hex 'TRIX SB I/O base 220, 210, 230, 240, 250, 260 or 270'
</p>
<p>
int 'TRIX SB IRQ 3, 4, 5 or 7'
</p>
<p>
int 'TRIX SB DMA 1 or 3'
</p>
<p>
bool '  Have TRXPRO.HEX firmware file'
</p>
<p>
string '  Full pathname of TRXPRO.HEX firmware file'
</p>
<p>
tristate 'VIA 82C686 Audio Codec'
</p>
<p>
tristate 'Support for OPTi MAD16 and/or Mozart based cards'
</p>
<p>
bool 'Support MIDI in older MAD16 based cards (requires SB)'
</p>
<p>
hex 'MAD16 audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'MAD16 audio IRQ 7, 9, 10 or 11'
</p>
<p>
int 'MAD16 audio DMA 0, 1 or 3'
</p>
<p>
int 'MAD16 second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'MAD16 MIDI I/O base 300, 310, 320 or 330 (0 disables)'
</p>
<p>
int 'MAD16 MIDI IRQ 5, 7, 9 or 10'
</p>
<p>
tristate 'Full support for Turtle Beach WaveFront (Tropez Plus, Tropez,
 Maui) synth/soundcards'
</p>
<p>
hex 'I/O base for WaveFront 210, 230, 260, 290, 300, 320, 338 or 330'
</p>
<p>
int 'WaveFront IRQ 5, 9, 12 or 15'
</p>
<p>
tristate 'Support for Crystal CS4232 based (PnP) cards'
</p>
<p>
hex 'CS4232 audio I/O base (normally 530, 604, E80 or F40)'
</p>
<p>
int 'CS4232 audio IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
int 'CS4232 audio DMA 0, 1 or 3'
</p>
<p>
int 'CS4232 second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'CS4232 MIDI I/O base 330, 370, 3B0 or 3F0'
</p>
<p>
int 'CS4232 MIDI IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
tristate 'Support for Yamaha OPL3-SA2, SA3, and SAx based PnP cards'
</p>
<p>
int 'Chipset (-1 for autoprobe, 2, or 3)'
</p>
<p>
hex 'OPL3SA2 audio I/O base (530 - F48 valid)'
</p>
<p>
int 'OPL3SA2 audio IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
int 'OPL3SA2 audio DMA 0, 1 or 3'
</p>
<p>
int 'OPL3SA2 second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'OPL3SA2 control I/O base (100 - FFE valid)'
</p>
<p>
hex 'OPL3SA2 MIDI I/O base (300 - 334 valid)'
</p>
<p>
int 'OPL3SA2 MIDI IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
tristate 'Limited support for Turtle Beach Wave Front (Maui, Tropez)synthesizer'
</p>
<p>
hex 'I/O base for Maui 210, 230, 260, 290, 300, 320, 338 or 330'
</p>
<p>
int 'Maui IRQ 5, 9, 12 or 15'
</p>
<p>
bool '  Have OSWF.MOT firmware file'
</p>
<p>
string '  Full pathname of OSWF.MOT firmware file'
</p>
<p>
tristate 'Support for Aztech Sound Galaxy (non-PnP) cards'
</p>
<p>
hex 'SGALAXY audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'SGALAXY audio IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
int 'SGALAXY audio DMA 0, 1 or 3'
</p>
<p>
int 'SGALAXY second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'SGALAXY SB I/O base 220 or 240'
</p>
<p>
tristate 'Support for AD1816(A) based cards (EXPERIMENTAL)'
</p>
<p>
hex 'AD1816 audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'AD1816 audio IRQ 5, 7, 9, 11, 12 or 15'
</p>
<p>
int 'AD1816 audio DMA 0, 1 or 3'
</p>
<p>
int 'AD1816 second (duplex) DMA 0, 1 or 3'
</p>
<p>
int 'AD1816 clock chip frequency'
</p>
<p>
tristate 'Yamaha OPL3-SA1 audio controller'
</p>
<p>
hex 'OPL3-SA1 audio I/O base 530, 604, E80 or F40'
</p>
<p>
int 'OPL3-SA1 audio IRQ 7, 9, 10 or 11'
</p>
<p>
int 'OPL3-SA1 audio DMA 0, 1 or 3'
</p>
<p>
int 'OPL3-SA1 second (duplex) DMA 0, 1 or 3'
</p>
<p>
hex 'OPL3-SA1 MIDI I/O base 330, 370, 3B0 or 3F0'
</p>
<p>
int 'OPL3-SA1 MIDI IRQ 3, 4, 5, 7 or 9'
</p>
<p>
tristate 'SoftOSS software wave table engine'
</p>
<p>
int 'Sampling rate for SoftOSS 8000 to 48000'
</p>
<p>
int 'Max &num; of concurrent voices for SoftOSS 4 to 32'
</p>
<p>
tristate 'FM synthesizer (YM3812/OPL-3) support'
</p>
<p>
tristate 'Loopback MIDI device support'
</p>
<p>
tristate '6850 UART support'
</p>
<p>
hex 'I/O base for UART 6850 MIDI port (Unknown)'
</p>
<p>
int 'UART6850 IRQ (Unknown)'
</p>
<p>
tristate 'VIDC 16-bit sound'
</p>
<p>
tristate 'Netwinder WaveArtist'
</p>
<p>
hex '  WaveArtist I/O base'
</p>
<p>
int '  WaveArtist IRQ'
</p>
<p>
int '  WaveArtist DMA'
</p>
<p>
int '  WaveArtist second DMA'
</p>
<p>
tristate 'NM256AV/NM256ZX audio support'
</p>
<sect>
Additional low level sound drivers
<p>
bool 'Additional low level sound drivers'
</p>
<p>
tristate 'ACI mixer (miroPCM12)'
</p>
<p>
tristate 'MSP3400 Audio for BT848'
</p>
<p>
tristate 'AWE32 synth'
</p>
<p>
tristate 'Gallant Audio Cards (SC-6000 and SC-6600 based)'
</p>
<p>
hex '  I/O base for Audio Excel DSP 16 220 or 240'
</p>
<p>
hex 'I/O base for MPU401 Check from manual of the card'
</p>
<p>
bool 'SC-6600 based audio cards (new Audio Excel DSP 16)'
</p>
<p>
bool 'Activate SC-6600 Joystick Interface'
</p>
<p>
int 'SC-6600 CDROM Interface (4=None, 3=IDE, 1=Panasonic, 0=?Sony?)'
</p>
<p>
hex 'SC-6600 CDROM Interface I/O Address'
</p>
<p>
bool 'Audio Excel DSP 16 (SBPro emulation)'
</p>
<p>
hex 'I/O base for Audio Excel DSP 16 220, 240'
</p>
<p>
int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11'
</p>
<p>
int 'Audio Excel DSP 16 DMA 0, 1 or 3'
</p>
<p>
bool 'Audio Excel DSP 16 (MSS emulation)'
</p>
<p>
hex 'I/O base for Audio Excel DSP 16 220 or 240'
</p>
<p>
int 'Audio Excel DSP 16 IRQ 5, 7, 9, 10, 11'
</p>
<p>
int 'Audio Excel DSP 16 DMA 0, 1 or 3'
</p>
<p>
bool 'Audio Excel DSP 16 (MPU401 emulation)'
</p>
<p>
hex 'I/O base for Audio Excel DSP 16 220 or 240'
</p>
<p>
int 'MPU401 IRQ for Audio Excel DSP 16 5, 7, 9, 10 or 0 (disable)'
</p>
<sect>
Kernel hacking
<p>
&num;bool 'Debug kmalloc/kfree'
</p>
<p>
bool 'Magic SysRq key'
</p>


</article>
